Quality Control Inspector

Supporting the Most Exciting and Meaningful Missions in the World

Quality Control Inspector - Germany

The Quality Control Inspector is responsible for maintaining the Quality Control, Environmental and Safety Programs at the field level in support of assigned aircraft and Support Equipment.
- (Typical duties include the following, although specific duties vary by assignment or contract.)_
- The Quality Control Inspector recommends, implements, and assists management to ensure a workplace safety is enforced; provides guidance to prevent injury and occupational illness.
- Evaluates violations or problems discovered during inspections and advises management on solutions, improvements, or policy changes to ensure compliance.
- Must be able to determine root cause and any corrective actions to prevent a repeat occurrence.
- Must be familiar with responding to customer complaints using Root cause analysis and recommend corrective actions.
- Working knowledge of electrical, electronic, mechanical and associated systems principles to complete properly all probable work tasks.
- Knowledge of Quality Control, Production and Supply procedures required to perform job assignment.
- Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components.
- Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data.
- Review and approve locally developed procedures and solutions to complex repair situations.
- Perform analysis of defects and interprets quality control rejection and failure trends.
- Monitor safety, training, and certification requirements.
- Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections.
- Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements.
- Maintain Quality, Safety, Training and Certification Records.
- Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services.
- Inspect forms and records related to aircraft maintenance.
- Inspect, remove, install, repair, replace, modify, disassemble, reassemble and calibrate complex aircraft mechanical and electromechanical systems in accordance with maintenance manuals, test procedures and other military publications.
- Perform other qualified duties as assigned.

Minimum Requirements
- High School Graduate or equivalent is required.
- Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for a facility credentials/authorization at the work location.
- Must have a current and valid US Passport.
- Must have five years of recent applicable aircraft maintenance experience.
- License: FAA A&P or FCC Elements 1 and 3 required.
- Shall hold a valid (current) FAA Inspection Authorization (IA) and one year inspecting UH60, CH47 or AH64s. If no IA, shall have a minimum five-years’ experience as an aircraft inspector on either UH60, CH47 or AH64s. Multiple MDS experience will be preferred.
- TESA approval: Must be able to qualify for TESA approval; must have over 5 years career total Aviation maintenance experience.
- Security: Must be able to obtain/maintain Security clearance (NAC-I) Interim NACI approved to start.
- Travel: As required in support of task order.

Knowledge & Skills
- Possess good communication skills; be adaptable, diversified and capable of troubleshooting entire aircraft system.
- Previous supervisory experience is preferred and the ability to successfully mentor subordinate Technical Inspectors in all Quality Control duties and responsibilities is required
- Must be familiar with FQA, FA and Q-Stop processes and presentation to the customer.
- Recommends, implements, and assists management to ensure a workplace safety is enforced; provides guidance to prevent injury and occupational illness.
- Evaluates violations or problems discovered during inspections and advises management on solutions, improvements, or policy changes to ensure compliance.
- Must be able to determine root cause and any corrective actions to prevent a repeat occurrence.
- Must be familiar with responding to customer complaints using Root cause analysis and recommend corrective actions.
- Working knowledge of electrical, electronic, mechanical and associated systems principles to complete properly all probable work tasks.
- Knowledge of Quality Control, Production and Supply procedures required to perform job assignment.
- Should be well versed in AR 95-1 (chapter 7), MECs, AMAMs, ASAMs, SOF, forms & records, AR 95-20 requirements and quality control procedures.
- Able to determine when faulty systems or asse